 |
|
|
Product
Photos
|
|
Part
Number
|
Click
On Image For Larger View
|
|
TTDM-128
|
The
TTDM-128 is the "front
end" for the TraceTek system, providing
the user interface, leak location data, event historical
data, and diagnostic information for the entire system. The
TTDM communicates with up to 128 TTSIM or 32 TTNRM
modules, or combinations of the two. The TTDM can
display leak location in field configurable units of
feet, meters, and zones, and can monitor water,
chemical, and fuel sensors simultaneously. The TTDM
communicates to the BMS/EMS in a variety of protocols.
|
|
TTSIM-1,1A |
Each
TTSIM can support long lengths of water, chemical, and
oils sensor cables and spot detectors. The TTSIM communicates to a TTDM
locating panel and/or a BMS/EMS system via two
protocols: Modbus (RTU or ASCI) and Johnson Controls N2.
TTSIM modules can be provided in individual enclosures
for distributed monitor/control systems, or racked when
centralized panels are desired.
For sensor cable runs up to 5000 feet,
use TTSIM-1.
If local valve control or local alarm is
required, use TTSIM-1A. |
|
TTC-1 |
Each
TTC can support up to 300 feet of of water, chemical,
and oil sensor cable and spot detectors. Ideal for
equipment control applications, each TTC offers discrete
relays for leak and trouble, selectable manual or
automatic reset, time delay and sensitivity. TTC modules
can be provided in individual enclosures for distributed
monitor/control systems, or racked when centralized
panels are desired. |
|
TTZENER
|
The
TTZENER is utilized in Hazardous Areas to eliminate the
possiblity of a voltage spike from the utilty electric
service or a lightning strike travelling out to the
sensor cable. The TraceTek sensor cable system is
approved for use in Hazardous Areas. The use of the
TTZENER makes the output from the TraceTek electronics
intrinsically safe.
|
|
TTMINI-PROBE
|
The
TTMini-Probe can be supplied configured to sense
either aqueous chemicals, or any hydrocarbon. It is well
suited for any low point spot detection application. In many cases, a combined system of TT3000 or TT5000 sensor
cables, coupled with TTMini-Probes offers the best
and most cost effective system.
|
|
TTWATER-PROBE
|
The
TTWater-Probe is designed for applications where on spot
detection is required, or when a cable system could be
damaged or abused. The probe can be easily
interconnected into any TraceTek sensor system.
|
|
|
|
|
|
|
|
|
|